AWG1000 Hardware/Software Installation Instructions:           1/24/04

Windows 2000/XP =>

1) Do not install AWG1000 card at this time.

2) UnZip all files into directory "C:\temp\awg1000\" (create
   directories if needed) You can move and/or copy the files later
   to a directory of your choice.

3) Run AWG1200_Register_Win2000_XP.bat. This will copy the Kernel
   driver windrvr6.sys to "c:\<windir>\system32\drivers\" directory
   and will register the Kernel driver in the Windows Registry so
   that it starts up each time the computer is rebooted.

4) Power off computer. Insert AWG1000 card. Power up computer.

5) When OS asks for Driver File point to "Chase_AWG1000.inf". If OS
   does not ask for file, then check hardware configuration and update
   if not listed properly under "Jungo" in Device Manager (see below).

   To check to see which driver is installed, do the following:

   => Control Panel
      => System
         => Hardware
            => Device Manager
               => Jungo
                    Chase_AWG1000
                    WinDriver

   If you see another driver in place of "Chase_AWG1000", then right
   click the first device under Jungo and click properties. Update
   the driver by pointing to "Chase_AWG1000". You may have to go
   through a series of menus.


Contact/Support Information:
--------------------
Email: <a href="&#109;&#97;&#105;&#108;&#116;&#111;&#58;&#116;&#101;&#99;&#104;&#115;&#117;&#112;&#112;&#111;&#114;&#116;&#64;&#99;&#104;&#97;&#115;&#101;&#50;&#48;&#48;&#48;&#46;&#99;&#111;&#109;">&#116;&#101;&#99;&#104;&#115;&#117;&#112;&#112;&#111;&#114;&#116;&#32;&#64;&#32;&#99;&#104;&#97;&#115;&#101;&#50;&#48;&#48;&#48;&#46;&#99;&#111;&#109;</a>  (Preferred)
Voice: 1-360-221-8455
Fax:   1-360-221-8457



-----------   D I R E C T O R I E S / F I L E S  ----------------  1/24/04
BASE_DIR
|
| readme.txt                 // This file.
| awg1000_manual_2040124.doc // User Manual for both AWG1000 and AWG1200
|
| AWG1200_Register_Win2000_XP.bat     // Installs Kernel driver for Win2000/XP
| AWG1200_UnRegister_Win2000_XP.bat   // Uninstalls Kernel driver for Win2000/XP
| AWG1000_Register_Win98_ME_NT4.bat   // Installs Kernel driver for Win98/ME/NT4.0
| AWG1000_UnRegister_Win98_ME_NT4.bat // Uninstalls Kernel driver for Win98/ME/NT4.0
|
| wdreg16.exe        // Called by AWG1000_Register_Win98_ME_NT4.bat
| wdreg.exe          // Called by AWG1200_Register_Win2000_XP.bat
| windrvr6.inf       // Setup file automatically called by above exe(s).
|
| awg1200_dll.dll          // DLL for 98/ME/NT4/2000/XP  ( extern "C" __declspec(dllimport) )
| awg1200_dll_import.h     // Header file for DLL
| awg1200_dll.lib          // Library file for DLL in Borland C++
|
| cp3240mt.dll    // Support Libraries - Put in System or Program directory
| cw3230.dll      //
| borlndmm.dll    //
|
| | Microsoft VC++ DLL Files
| | | awg1200_dll_msvc.lib     // Used by MSVC Project to compile DLL above
| | | awg1200_dll_import.h     // Header file for DLL
|
|
| awg1200.exe           // Simple GUI to test DLL and Kernel drivers
| 64K_Data.txt          // Sample data - 64K of Lorentzian Data Pulse Stream
| random_noise.txt      // Sample data - Random noise
|
| Chase_AWG1000.inf   // Plug-And-Play file needed by 98/ME/NT4/2000/XP for automatic
|                     // hardware configuration.
|
| windrvr6.sys    // Windows 98/ME/NT4/2000/XP Driver - copy this virtual driver
|                 // to "c:\<windir>\system32\drivers\" if not automatically done
|                 // so after running batch file.
|

--------------   E N D    ----------------